The Importance of Siding Nails, Fasteners, and Screws

When it comes to siding, a very important part of the installation is the type of nails, fasteners, and screws used. Unfortunately, some contractors will use whatever they can get their hands on as a means of saving money. However, unless nails, fasteners, and screws are made from galvanized or stainless steel, you will likely run into problems down the road.

Avoid Rust

What happens is the wrong type of nails, fasteners, and screws are used, which cause rust. These steel and iron supplies are used because they are inexpensive and strong. While this might sound like a good idea, the problem sets in when the nails, fasteners, and screws get wet from rain, snow, or washing the siding. With this, rust develops, which causes unsightly brown and orange spots.

Now, what many people do not understand is that rust corrosion can actually cause serious issues. Keep in mind that initially, the rust corrosion is simply unsightly. At some point, these areas of damage would be seen on the siding panels or planks, even penetrating paint and stain. Even worse, the corrosion of the nails, fasteners, and screws causes things like steel to expand. When this occurs, the siding becomes weakened. Now, if the iron supplies were to be exposed to any chemically treated lumber, the loss of strength is accelerated.

Galvanized or Stainless Steel

The best way to avoid rust corrosion problems with siding is to make sure nails, fasteners, and screws are made from galvanized or stainless steel. If you go with stainless steel, you need to know that there are two options. The best and most common are numbered as 304 and 316. The three basic ingredients associated with stainless steel include chromium, alloy of steel, and nickel.

Steel Difference

The difference between 304 and 316 is that 304 can be damaged if exposed to some harsh chemicals and salt spray from the ocean. This particular choice contains 18% chromium and 8% nickel. On the other hand, the 316 is highly resistant to corrosion. The reason is that the 316 contains molybdenum, which makes the steel super strong and corrosion resistant.

Contractor Check

For years, the choice for home siding is stainless steel nails, fasteners, and screws. For those individuals, they can enjoy a beautiful home with little to no worry about rust corrosion. However, if you were in the market for new siding, make sure you choose a company or professional installer who uses only the best stainless steel supplies. Otherwise, within a few years, you would be finding yourself with ugly spots on the siding, along with damage to the siding itself. Obviously, this would be something you want to avoid.